Door is visibly sagging
The top corner has dropped and the door no longer sits square in the opening.
Door alignmentServices / Commercial Door Alignment & Hinges
Commercial door sagging, dragging or not latching? We inspect the door, frame and hinge side, correct the alignment and replace failed hinges with a compatible full-length geared continuous hinge when needed. Emergency and scheduled service across Toronto and the GTA.

Find the cause of the misalignment
A heavy commercial or glass door can drop at the top corner, drag on the threshold, miss the strike or pull fasteners out of the hinge side. A full-length continuous hinge spreads the door load along the frame instead of concentrating it at a few hinge points.
What to look for
Photos of the door, frame and hardware show whether the frame, hinge or hardware needs repair.
The top corner has dropped and the door no longer sits square in the opening.
Door alignmentThe lower edge rubs the threshold, floor or frame every time the door moves.
Dragging doorStandard hinge screws or hinge points no longer hold the weight of the door.
Repeated hinge failureThe latch misses the strike because the door has shifted on the hinge side.
Closing and lockingThe door load has damaged the hinge-side attachment or pulled the door away from the frame.
Hinge-side inspectionA failed hinge can leave a storefront or commercial entrance unable to secure after hours.
Emergency responseChoose the right repair
Sagging is a symptom. We inspect the clearances, hinge attachment, frame and latching before confirming the work.
When the door and frame remain serviceable, we assess the hinge-side position, swing and latch alignment to determine whether the existing hardware can be retained.
Repeated hinge failure or a damaged hinge-side attachment may call for a compatible full-length geared hinge. It spreads the load along the frame and supports the door while we restore its alignment.
A split, pulled or damaged frame needs assessment and repair before it can hold the hinge securely. See our door frame and jamb repair service.
How we handle it
We assess the failure point, stabilize the entrance and restore reliable closing and locking.
We control the door so it does not continue dropping, twisting or damaging the frame.
We check the clearances, hinge attachment and frame condition. If replacement is needed, we measure the door and confirm the hinge type and length.
We carry out the assessed alignment or hinge-side repair. When a continuous hinge is needed, we fit the compatible full-length geared hinge to support the door.
We adjust the door and test swing, closer, latch, lock, threshold clearance and secure closing.
Door height and material, hinge type, existing hinge and fastener damage, frame condition, door weight, access and the alignment work required affect the quote. We provide the total price before work begins, and no additional charge is added without customer approval.
A sagging door caused by gradual hinge or hardware wear is normally a maintenance repair, not sudden damage. Send photos of the full door, top and bottom clearances and hinge side so we can confirm the likely scope before service.
Related services
Choose the service that matches the part of the entrance that failed.
For a split, pulled or damaged frame that must be repaired before the hinge can hold correctly.
For combined door, frame, lock, closer or glass damage after impact or forced entry.
For a business entrance that cannot close and needs temporary emergency control.
Common questions
No. Sagging alone does not tell us which part has failed. We check the door, frame, existing hinge attachment and clearances before deciding whether alignment, frame repair or continuous hinge replacement is appropriate.
A continuous hinge runs almost the full height of the door. A geared continuous hinge spreads the door weight along the frame, reducing stress at individual hinge points.
Common signs include sagging, dragging, repeated hinge failure, a dropped top corner, hinge-side movement or a door that no longer latches because it has shifted.
Yes. Emergency response is available when a commercial door cannot close or secure. Whether the final hinge can be installed immediately depends on the correct hinge length and finish being available and the door and frame being suitable.
The hinge can improve weight distribution, but it cannot replace a frame repair when the frame or hinge-side attachment is already damaged. We inspect both and connect the repairs when needed.
Yes, when the door and frame are compatible with the selected continuous hinge. We confirm the door construction, frame condition, closer and locking operation before installation.
Need door repair?
Include the full door, the top and bottom clearances and the hinge side. We confirm whether the problem points to alignment, frame repair or continuous hinge replacement.
+1 (437) 755-5575Emergency door securing and repair across Toronto and the GTA.