Temporary protective cover
Used when the opening can be protected without a full board-up and needs coverage until final glass work.
Services / Broken Glass Help
Broken, shattered or smashed glass needs fast attention. We remove loose hazards, protect the damaged window, door or storefront and replace the glass when the correct panel is available.
The frame may be damaged, loose glass may be unsafe and the property may be open to weather or access. We inspect the full area before choosing the repair.
Smashed home, condo, office or storefront windows secured with temporary protection.
Broken window helpResidential front-door and commercial entrance-door glass protected or replaced.
Entry door glass helpBusiness windows, storefront panels and commercial entrances secured after damage.
Storefront glass helpPatio or sliding-door glass exposed? Use Residential Glass, Window and Door Securing for emergency protection of the residential opening.
Depending on the glass and frame, we may install a temporary cover, use plywood board-up, secure the door or replace the panel directly. Once the area is safe, we measure and install the correct glass.
Protection choice
The right choice depends on the glass type, frame condition and whether the property can stay exposed. We use only the protection the job actually needs.
Used when the opening can be protected without a full board-up and needs coverage until final glass work.
Used when the glass opening is open, public-facing, large or unsafe to leave uncovered.
Once the property is safe, we measure the opening and install or order the correct replacement glass.
Broken glass safety
Keep the area clear and approach the damaged opening only when it is safe. Do not put yourself at risk to take photos or move unstable glass.
If anyone is injured, a break-in is in progress or there is a fire or immediate danger, contact the appropriate emergency service first.
Keep children, pets, customers and staff away from loose glass, sharp edges and the exposed opening.
Do not touch loose or hanging glass with bare hands, walk through the damaged area or attempt to board a large or elevated opening yourself.
When safe, photograph the full opening and surrounding frame. Send the photos with your location so we can confirm the next step.
After an incident
If the glass was broken during a break-in, vandalism, storm or impact, photograph the complete opening, the close-up damage and the point of entry before loose material is removed, when it is safe to do so.
Keep damaged hardware unless it creates a hazard, and ask your insurer before discarding it. BoardUp can provide job photos and an itemized invoice; the insurer or adjuster decides what the policy covers.
Commercial door glass option
When the correct commercial door panel is available and the door frame is suitable, BoardUp may remove the damaged glass and install the replacement during the same visit. Other glass types may need to be measured and ordered.
Before and after
The first result is a safe property. The permanent glass is installed as soon as the correct panel is ready.


Completed work
Completed work includes broken commercial glass, door glass, sliding-door glass and storefront damage.
CityPlace, Toronto · Commercial Entry Door
Shattered glass and loose fragments at a Toronto business entrance were secured with board-up before the door was re-glazed.
View CityPlace commercial entry-door project →



Mississauga · Fixed Storefront Glass
The lower fixed glass panel was broken and knocked out. Temporary board-up closed the opening while the replacement pane is pending.
View project →Ajax · Commercial Glass
Broken commercial glass left the opening exposed. We installed temporary protection so the site was safe until permanent glass work could follow.
View project →



Oshawa · Sliding Door Glass
A damaged sliding-door opening in a home was secured quickly so the property was not left open while the final glass replacement was planned.
View project →Etobicoke · Basement Window
The broken basement window was secured with plywood board-up first, then new glass was installed in the existing frame.
View project →

Broken glass questions
For some commercial doors, yes. We first confirm the panel size, glass type and frame condition. If a matching panel is available, we install it immediately; otherwise we protect the door and return with the correct glass.
Keep people and pets away from loose or hanging glass. Do not touch unstable pieces or enter the damaged area. Contact emergency services first when required, then send photos from a safe position so we can confirm the next step.
Yes. Depending on the damage, we use a temporary cover, plywood board-up or another secure barrier until the correct glass is ready.
No. Board-up or temporary cover is the emergency protection step. After the property is secured, the glass can be measured, ordered or replaced as needed.
Yes. We secure broken glass in windows, doors, storefronts, commercial entrances, patio doors, French doors and residential openings across Toronto and the GTA.
Yes. We secure glass broken during break-ins, vandalism or impact, then arrange the permanent glass or door repair.
Yes. Text photos of the broken glass, the surrounding frame and the full opening so we can confirm what needs to be secured.
Broken or shattered glass?
Send photos of the broken glass, exposed opening and surrounding frame. We secure the property first, then handle the glass replacement or repair.
+1 (437) 755-5575Emergency broken glass securing across Toronto and the GTA.